Description of AF series four-axis lift
This product is suitable for industries with vertical lifting requirements such as chips, panels, warehousing, and return lines.
It can replace traditional pneumatic cylinders and worm equipment, while achieving multi-level and precision control;
Through steering equipment, single-screw products can be expanded to four-screw, six-screw, even eight-screw.
Each type can be adjusted based on customer needs, so optimization among space, cost and accuracy can be achieved.
Features of AF series four-axis lift
AF series four-axis lift is a U-shaped structure and uses nuts for lifting.
Specification of product number
- Frame size: RA065-RA210
- Number of screw: 1, 2, 4, 6, 8 screws
- Configuration style: H-type, U-type (no need to fill in one and two screws)
- Enter position: Set in the middle (A), Side (B)
- Input style: Flange type (F), Solid shaft (S), Reducer (G)
- Ratio: 2~50 ratio
- Output style: Rotating screw (H), Rotating nut (B)
- Range of motion: Below 1000mm
- Accessories: Top plate (A), Linear guide rod (C),Protective tube (D)
- Motor shaft diameter
- Motor pilot diameter
- Motor bolt circle diameter
- Motor bolt hole diameter
Parameters of AF Series Double-Axis Lift
| Select Parameters |
1. Load: (kg) | 2. Range of motion: (mm) |
|---|---|---|
| 3. Moving speed: (mm/sec) | 4. Center span: (mm) | |
|
One-screw
Two-screw
Four-screw (U-type)
Four-screw (H-type)
|
||
Factories of Fubao Mechanic Tech
Quote Now