DG Series Planetary Reducer-Fubao Mechanical

Features of DG & DGT Reducer

1. Compact Structure

Planetary Gear Reducer is characterized by full utilization of space, designing bearings and gear ratio in a limited space, so that the product is smaller and more space-saving than traditional reducers.

2. High Efficiency

When the planetary gear set is running, it will be in a completely tight meshing state, which reduces the situation of gear collision or gear damage caused by partial meshing.

The characteristic of complete tight meshing allows the efficiency loss of each gear transmission only 3%.

This type of transmission mode can ensure that the kinetic energy is input to the reducer and then to the mechanism end, while maintaining high transmission efficiency and preventing mechanical loss caused by friction and slippage of internal gears.

3. High Axial Radial Load Capacity

The reducer output shaft from Pin Hong Technology adopts a style of large span, so that the bearing is arranged at both ends of the output shaft.

This design can effectively disperse the force acting on the out put shaft and reduce the load of the bearing.

In other words, the product of the same size has increased load capacity in axial radial direction.

4. High Strength

The gear set of the reducer is very strong and stable, and the thickness of the gear disperses the load acting on the gear. The large-span bearing set provides a stable structure;

The precision gear set distributes the load to each planetary gear under tight meshing to withstand the torque load.

With this design, Pin Hong can provide better products to the market.

5. High Stability

The precision machining of Pin Hong Technology ensures that the products are coaxial and concentric, and the bearing designed with a large span provides the product with excellent stability.

Drawings of DG & DGT Reducer

Parameters of DG & DGT Reducer

Size		DG060	DG090	DG115	DG142	DG180	DG220
D1		70	100	130	165	215	250
D2		5.2	6.8	8.6	10.5	13	17
*D3		16	22	32	40	55	75
D4		50	80	110	130	160	180
D5		25	35	65	65	100	80
C1		37	48	65	97	105	138
C2		7	10	12	15	20	30
C3		28.5	36.5	51	79	82	105
C4		2	3	5	5	6	7
C5		25	32	40	65	70	90
C6		60	90	115	142	180	220
C7		16	18	20	17	20	30
C8	L1	78	103.5	125.5	154.5	188	219.5
C8	L2	100	129.5	155.5	192.5	233	269.5
C9		20	25.5	25.5	34.5	35	44.5
C10		13	18	18	22.5	23	28.5
L	L1	135	177	216	286	328	402
L	L2	157	203	246	324	373	452
M		M5XP0.8X12.5	M8XP1.25X20	M12XP1.75X30	M16XP2.0X40	M20XP2.5X50	M5XP02.5X50
K1		5	6	10	12	16	20
K2		18	24.5	35	43	59	79.5
d		≤19	≤24	≤32	≤38	≤55	≤55
△A		50	80	110	130	160	200
B		6	10	10	10	11	12
△F		≤33.5	≤46	≤53	≤66	≤82.5	≤88.5

※: The reducer output shaft can be customized in size and length for customers.

△: The special size indicated by this symbol varies according to customer needs and servo motors.

Note: Three-stage is not in this table, please contact our sales if it is needed.

Size	Stage	Ratios	DG060	DG090	DG115	DG142	DG180	DG220
Rated output torque(Nm)	1	3	55	130	208	342	588	1140
		4	50	140	290	542	1050	1700
		5	60	160	330	650	1200	2000
		6	55	150	310	600	1100	1900
		7	50	140	300	550	1100	1800
		8	43	114	247	475	950	1520
		10	40	100	230	450	900	1500
	2	9	55	130	208	342	588	1140
		12	50	140	290	542	1050	1700
		15	55	130	208	342	588	1140
		16	50	140	290	542	1050	1700
		20	50	140	290	542	1050	1700
		25	60	160	330	650	1200	2000
		28	50	140	300	550	1100	1800
		30	55	150	310	600	1100	1900
		32	43	114	247	475	950	1520
		35	50	140	300	550	1100	1800
		40	43	114	247	475	950	1520
		50	60	160	330	650	1200	2000
		60	55	150	310	600	1100	1900
		70	50	140	300	550	1100	1800
		80	43	114	247	475	950	1520
		100	40	100	230	450	900	1500
Max output torque(Nm)	1,2	3~100	3.0 times Batedoatpat torque
Return backlash(arcmin)	1	3~10	≤5	≤5	≤5	≤5	≤5	≤5
Return backlash(arcmin)	2	9~100	≤7	≤7	≤7	≤7	≤7	≤7
Rated input speed(rpm))	1,2	3~100	5000	4000	4000	3000	3000	2000
Max input speed(rpm)	1,2	3~100	10000	8000	8000	6000	6000	4000
Weight (kg)	1	3~10	1.5	4.5	9	17	34	53
Weight (kg)	2	9~100	2.2	6	11	21	40	74
Torsional stiffness(Nm/arcmin)	1,2	3~100	2.5	5	10	25	70	115
Allowable Radial Load(N)			920	1800	3350	4200	5800	17500
Allowable axial load(N)			460	890	1700	2100	2900	8750
Noise(dB)			≤58	≤60	≤63	≤65	≤67	≤70
Life(hrs)			20000
Efficency(%)	L1,L2	3~100	≥97
Efficency(%)	L1	3~10	≥94
Temperature(°C)	L2	12~100	-10℃~+90℃
Degree of protection	L1,L2	3~100	IP65
Grease	L1,L2	3~100	Fully Synthetic Grease
Moment of inertia(kg.cm)	1	3	0.16	0.61	3.25	9.21	28.98	69.61
		4	0.14	0.48	2.74	7.54	23.67	54.37
		5	0.13	0.47	2.71	7.42	23.29	53.27
		6	0.13	0.45	2.65	7.25	22.75	51.72
		7	0.13	0.45	2.62	7.14	22.48	50.97
		8	0.13	0.44	2.58	7.07	28.98	50.84
		10	0.13	0.44	2.57	7.03	58.98	50.56
	2	9	0.16	0.61	3.25	9.21	28.98	69.61
		12	0.16	0.61	3.25	9.21	29.98	69.61
		15	0.16	0.61	3.25	9.21	29.98	69.61
		16	0.14	0.48	2.74	7.54	23.67	54.27
		20	0.14	0.48	2.74	7.54	23.67	54.27
		25	0.13	0.47	2.71	7.42	23.29	53.27
		28	0.14	0.48	2.74	7.54	23.67	54.37
		30	0.16	0.16	3.25	9.21	28.98	69.61
		32	0.14	0.48	2.74	7.54	23.67	54.37
		35	0.13	0.47	2.71	7.42	23.29	53.27
		40	0.14	0.48	2.74	7.54	23.67	54.37
		50	0.13	0.47	2.71	7.42	23.29	53.27
		60	0.13	0.45	2.65	7.25	22.75	51.72
		70	0.13	0.45	2.62	7.14	22.48	50.97
		80	0.13	0.44	2.58	7.07	22.59	50.84
		100	0.13	0.44	2.57	7.03	22.14	50.56